The Future of LED Fixture Lighting
Spirit LED Lighting introduces LED Diamond Lite, the first
Plug and Play LED lighting system that allows you to simply unplug
existing Fluorescent PL13 bulbs and plug in the LED Diamond Lite
unit without the need of any electrician or retrofitting of your
showcase. It truly is as easy as PLUG & PLAY!
Total compatibility
The first and foremost advantage of using the LED Diamond
Lite versus any other LED retrofit system is that our unit is
totally compatible with existing Fluorescent PL13 units. Simply
unplug the existing Fluorescent PL13 units and plug in the LED
Diamond Lite. There is no electrician and/or retrofitting of the
actual showcase required in any way thus saving enormous costs and
downtime versus any other solution of other LED retrofit systems.
The LED Diamond Lite will not void any showcase warranty because
only the light bulb is being changed.
Proven dramatic sales increases
Actual In-Store test results have demonstrated our LED Diamond Lite
product increased jewelry sales a minimum of 200% to 300% after
replacing the traditional Fluorescent PL13 bulbs.
Enormous energy savings
No electrician or retrofitting is required. In addition to this
valuable cost saving the LED Diamond Lite is energy efficient. A
retailer currently using Fluorescent PL13 units consumes 13 watts
per bulb per hour. The LED Diamond Lite unit will use 8 watts per
hour. Assuming usage of 8,760 hours per year at and an energy cost
of 12 cents per kilowatt, that would equate to a savings of $5.78
per unit per year IN ENERGY COSTS ALONE.
PAYBACK (ROI) 3 YEARS OR LESS
Based on Energy Savings, Bulb Replacement Cost and
Maintenance Cost. BEFORE FACTORING IN INCREASED SALES RESULTS OF
200-300%.
Sustainability / Green benefits enefits and savings
Our LED Diamond Lite has no mercury to dispose of that
harms the environment and there are no disposal costs. It costs
$1.00 to dispose of a traditional Fluorescent PL13 bulb with
mercury. No Ultra Violet Light - Fluorescent lights have UV light
which changes the color of fixtures and changes chemical compounds.
Our LED Diamond Lite unit has none of these effects.
Built-in heat eat sink
Heat dissipation is a challenge in LED designs. LED Diamond
Lite has an aluminum extrusion enclosure with built-in heat
sink/radiation fins located near the LED to disperse heat caused by
the LED and keep them running cool. Built-in glare control - Glare
is eliminated at normal viewing angles when installed at the typical
45 degree angle due to a built-in glare shield.
Positive aspects of LED diamond lite vs.existing pl13 cfl
bulb
• No Heat in the light source, which creates.
• Cooler temperatures in the jewelry cases.
• No Ultra Violet Radiation.
• No Mercury.
• Very Rugged Design to prevent breakage.
• Very Consistent Color temperatures (CCT) from bulb to bulb.
• High Lumen (Brightness) levels compliment the Merchandise.
• Extensive reliability data supporting the lifetime of up to
50,000+ hours.
• Very directional light eliminating wasted light and reflection.
• Cuts Energy Consumption in Half.
• US Patent # D614,323 S.
• UL Approved.
• PROVEN ACTUAL IN-STORE TESTS
• INCREASED SALES 200-300%.